This guide comes with the top 10 best boat fenders available on the market. Therefore, if you are looking for the best boat fenders, you have everything you need here.
In Hurry? Checkout Our Top Pick Of Best Boat Fenders.
Our Top Pick
9.7/10 our score
Best Boat Fenders
| Rank | Product Name | Score |
|---|---|---|
|
1  |
Polyform G Series |
9. 7 |
|
2  |
Extreme Max BoatTector |
9. 5 |
|
3 |
Hull Hugr P1B |
9. 1 |
|
4 |
MSC Vinyl Ribbed |
8. 8 |
|
5 |
Taylor Made Low Freeboard |
8. 6 |
|
6 |
Kwik Tek Hull Hugr 1CB |
8. 2 |
|
7 |
Polyform HTM Series |
8. 0 |
|
8 |
Norestar Ribbed |
7 .7 |
|
9 |
Taylor Made Big B |
7. 4 |
|
10 |
Taylor Made Super Gard |
7. 2 |
1. Polyform G Series
9.7/10 our score
- A general purpose, value boat fender made by Polyform and manufactured in the USA
- Six available sizes G-1 through G-6 designed for boats 10 ft. to 40 ft. in length
- Designed for recreational, trailered boats in protected moorings
2. Extreme Max BoatTector
9.5/10 our score
- Make sure this fits by entering your model number.
- Includes two 6. 5” x 22” BoatTector fenders and two 3/8” x 5' fender lines
- Equipped with a needle valve to inflate or deflate each fender to a desired pressure (needle valve pump not included)
- Reinforced molded eyelets ensure longevity and strength
- UV stabilized, chemically resistant
- Two-year limited
3. Hull Hugr P1B
9.1/10 our score
- Engineered specifically for PWCs, hinges in the center to protect PWC from docks designed for bigger boats
- Hooks under the rub rail with a molded acetyl hook integrated into the back of the fender
- Connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided
- Or thread the strap though the rubber block provided and place it inside the PWC’s storage compartment
- Recommended 2 fenders per PWC
4. MSC Vinyl Ribbed
8.8/10 our score
- Protect your boat from hull scratches, scuffs or structural damage
- Made of High gloss marine-grade vinyl for rough usage
- Molded ribs to minimize fender roll
- Air valve system for easy inflation
- Pack of two sets(including fender lines and a simply constructed inflator）
5. Taylor Made Low Freeboard
8.6/10 our score
- Make sure this fits by entering your model number.
- The first boat fender to address the needs of low freeboard boats, this square Low Freeboard fender holds the fender in position better and prevents it from rolling out of place
- Shaped to protect the gunwales and rubrail, it offers superior protection compared to regular fenders against high docks
- Can be tied over the cleat to position it higher on the boat, putting protection where it is needed
- Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjustment
- Standard size measures 14" long and larger size measures 23" long for increased hull protection
6. Kwik Tek Hull Hugr 1CB
8.2/10 our score
- Make sure this fits by entering your model number.
- Will not roll up like traditional round fenders
- Easily folds up for under seat storage
- Tough marine grade tri-laminate covers are rip proof and durable
- Polycarbonate grommets at each for easy hanging
7. Polyform HTM Series
8/10 our score
- A hole through middle style boat fender made by Polyform and manufactured in the USA
- Four available sizes HTM-1 through HTM-4 designed for boats 20 ft. to 50 ft. in length
- A versatile fender built with reinforced tube ends and molded ribbing for greater durability
- This fender ships as a single unit, pre-inflated, and has a Polyform inflation valve to adjust pressure
8. Norestar Ribbed
7.7/10 our score
- Make sure this fits by entering your model number.
- Double eye: hang vertically or horizontally
- 5-1/2" x 20" fender protects boats up to 20', 6-1/2" x 23" protects boats up to 25', 8-1/2" x 27" protects boats up to 30'
- Non-abrasive, safe for gelcoat
- Vertical ribs provide extra protection
- Two Black Fender Lines Included
9. Taylor Made Big B
7.4/10 our score
- Make sure this fits by entering your model number.
- 10-inch x 26-inch, recommended for boats 35 to 50 feet
- Lifetime Guarantee against splitting or bursting for the life of your boat
- Versatile Big B fender incorporates a ¾-inch Center Rope Tube that allows end-to-end line passage, can be hung vertically or horizontally with a single line
- Horizontal hanging is useful protection against pilings, awkward docking situations, and tidal change areas
- Made from the highest quality marine-grade vinyl with a high gloss finish
- Seamless one-piece construction with even wall thicknesses and built-in inhibitors to resist fading and discoloration, with ribbed sides that minimize roll to protect your boat and even wall thicknesses
- Fender color options match gelcoat colors of today’s boats
- Easy-to-use valve — football needle style valve that is integrally molded into the fender for easy inflation
- Ships inflated, Rope not included
- Over 50 years of boat fender expertise
10. Taylor Made Super Gard
7.2/10 our score
- Make sure this fits by entering your model number.
- Made in the USA of the highest quality marine grade vinyl, recommended for boat size 15 to 20 feet
- Feature a high gloss finish and double molded black ends for extra strength
- Seamless one-piece construction with ribbed sides minimizes roll
- Molded-in valve ensures easy inflation and long life
- Rubber football needle valve for easy inflation and long life, ships inflated
- Guaranteed for the life of your boat against splitting or bursting.There is room for some variation in size given that this is an inflatable product. The length measures from one hole to another hole.