In this review, we evaluate the best circular saw blade for general use available today. We have also included a comprehensive guide that helps you pick the best product. We hope that by going through the top 10 best circular saw blade for general use reviews below, you can effectively narrow down your choice and find the most appropriate one you need.
In Hurry? Checkout Our Top Pick Of Best Circular Saw Blade For General Use.
Our Top Pick
9.7/10 our score
Best Circular Saw Blade For General Use
Rank | Product Name | Score |
---|---|---|
1 |
Makita A-85092 6-1/2 inch 24T Carbide |
9. 7 |
2 |
Freud 10 inch x 40T Thin Kerf (LU86R010) |
9. 5 |
3 |
IRWIN Tools MARATHON WeldTec |
9. 1 |
4 |
Bosch DCB624 6-1/2 In. 24 Tooth Edge |
8. 8 |
5 |
Bosch DCB1040 Daredevil 10-Inch |
8. 6 |
6 |
14 inch Sintered 10mm Wet/Dry by MAXTITE |
8. 2 |
7 |
OVERPEAK Cutting Circular Saw Blade |
8. 0 |
8 |
14 inch Sintered Diamond Saw Blade (10 Pack) |
7 .7 |
9 |
COMOWARE Circular Saw Blades |
7. 4 |
10 |
Luxite Saw 12 inch 60-Tooth Carbide |
7. 2 |
1. Makita A-85092 6-1/2 inch 24T Carbide
9.7/10 our score
- Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
- Specially designed for cordless saws to permit more cuts per charge
- Fully hardened and expertly hand-tensioned steel saw plates for true cuts
- For use with 6-1/2 inch Cordless Circular Saws with 5/8 inch arbor
2. Freud 10 inch x 40T Thin Kerf (LU86R010)
9.5/10 our score
- Premium TiCo HI-Density Carbide General Purpose Blend for Maximum Performance
- Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life
- Positive Hook Angles for fast cutting and easy feed
- Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up
- Well-Balanced, Anti-Vibration Design
3. IRWIN Tools MARATHON WeldTec
9.1/10 our score
- Heat resistant non-stick coating reduces binding and gumming for cleaner, truer cuts
- Perimeter venting allows faster chip ejection and a strengthened core
- Laser cut plate with expansion control slots reduces warping and increases blade control
- Ring tensioned to maintain balance for straighter cuts
- The IRWIN Weld Tec Circular Saw Blade, Miter, is made stronger to last longer
- Carbide teeth are welded not brazed, resulting in stronger tooth bond, longer life, and durability
4. Bosch DCB624 6-1/2 In. 24 Tooth Edge
8.8/10 our score
- Brute Carbide – an upgraded C3/C4 micro grain formulation for increased impact damage resistance
- ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood
- SpeedCoat – an antifriction finish for faster cutting with no burning or melting
- Thinner kerf – provides faster cuts and less waste
- Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts
- Edge blades – developed for extreme performance for specific material and application
- Quality manufacturing – features the best materials and innovative engineering
5. Bosch DCB1040 Daredevil 10-Inch
8.6/10 our score
- Brute Carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance
- ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood
- SpeedCoat – an antifriction finish for faster cutting with no burning or melting
- Thinner kerf – provides faster cuts and less waste
- Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts
6. 14 inch Sintered 10mm Wet/Dry by MAXTITE
8.2/10 our score
- This general purpose segmented blade is for fast cutting at a low initial cost on a wide variety of materials
- A heat treated steel core provides extreme blade strength for a deep cut
- The 14 inch blades have been treated with laser welds on both sides of the segments to add strength for better cutting speed and longer blade life
7. OVERPEAK Cutting Circular Saw Blade
8/10 our score
- OVERPEAK saw blades are made of harder tungsten carbide, 4 sided grinded blades cut wood like butter
- Our saw blades are made of harder tungsten carbide and have a cutting life 5 times longer than others, professional designed for durability
- The cut it leaves is so smooth that you may think it has been sanded by 600 grit sandpaper
- The blade can be cut straight and realistically, it won't chip in soft wood, and the cutting edge looks like someone has polished it
- The Overpeak 10 inch carbide blade is 40 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate
8. 14 inch Sintered Diamond Saw Blade (10 Pack)
7.7/10 our score
- This general purpose segmented blade is for fast cutting at a low initial cost on a wide variety of materials
- A heat treated steel core provides extreme blade strength for a deep cut
- The 14 inch blades have been treated with laser welds on both sides of the segments to add strength for better cutting speed and longer blade life
- IDEAL FOR CUTTING Concrete, Brick, light weight Block, Pavers, Field Stone, and masonry materials either wet of dry
- Can be used on High Speed Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws
9. COMOWARE Circular Saw Blades
7.4/10 our score
- UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH - The 40 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade
- HIGH QUALITY CARBIDE MATERIAL - Provide the best cutting experience, with good cutting performance
- WIDELY USE - The 7-1/4 inch saw blade has a 5/8 inch diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use
- Excellent ATB Style - The ATB style which adds the cutting speed and durability
- USE GUIDE - The equipment should be equipped with safety protection device
10. Luxite Saw 12 inch 60-Tooth Carbide
7.2/10 our score
- These 12-inch, 60-tooth combination blades can rip boards along the wood’s grain or cut across the grain depending on the user’s application
- Luxite Saw Series 25 12-inch blades feature an original 4 + 1 grind design
- The blades’ carbide tips are ideal for delivering cleaner cuts and a longer product life than standard saw blades
- Each blade is designed with variable-depth and variable-pitch teeth, which limits the saw’s operating noise and vibrations for increased user safety
- These USA-made 60-tooth blades are compatible with nearly any 12-inch table saws with a 1 inch arbor or miter saw