This guide comes with the top 10 best class d amplifier ic available on the market. Therefore, if you are looking for the best class d amplifier ic, you have everything you need here.
In Hurry? Checkout Our Top Pick Of Best Class D Amplifier Ic.
Our Top Pick
9.7/10 our score
Best Class D Amplifier Ic
Rank | Product Name | Score |
---|---|---|
1 |
HiLetgo 5pcs PAM8403 2x 3W Mini Digital Power Amplifier Board AMP Class D 2.5-5V Input |
9. 7 |
2 |
Audio IC Development Tools Stereo 3.7W Class D Audio Amplifier (1 Piece) |
9. 5 |
3 |
Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece) |
9. 1 |
4 |
Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W CEA Rated |
8. 8 |
5 |
2 Channel Amplifier Stereo Audio Amp Mini Hi-Fi Class D Integrated TPA3116 Amp for Home Speakers 50W x 2, with 19V 4.74A Power Supply - Fosi Audio V1.0B Black |
8. 6 |
6 |
Fosi Audio BT20A Bluetooth 5.0 Stereo Audio 2 Channel Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0 CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116 (with Power Supply) |
8. 2 |
7 |
NOYITO PAM8406 Stereo Class D Audio Amplifier Module Development Board 3W+3W Anti-electromagnetic Interference |
8. 0 |
8 |
Fosi Audio BT30D Bluetooth 5.0 Stereo Audio Receiver Amplifier 2.1 Channel Mini Hi-Fi Class D Integrated Amp 50 Watt x2+100 Watt for Home Outdoor Passive Speakers/Subwoofer Powered Subwoofer |
7 .7 |
9 |
ACEIRMC TPA3116D2 TPA3116 XH-M543 Dual Channel Stereo High Power Digital Audio Power Amplifier Board 120W+120W DIY Module |
7. 4 |
10 |
30 Types 74HCxx Series Logic IC Assortment Kit, High-Speed Si-Gate CMOS IC. |
7. 2 |
1. HiLetgo 5pcs PAM8403 2x 3W Mini Digital Power Amplifier Board AMP Class D 2.5-5V Input
9.7/10 our score
- Super mini volume: 1.85 x 2.11 cm.Can be easily placed in a variety of digital products within a small space, high efficiency amplification
- Dual-channel stereo, 5V power supply can output 3W +3 W power, can be directly driven 4Ω, 8Ω small speakers, the output power, enough energy, good sound quality.
- Excellent noise suppression, no audio input in the case of ear close to the speaker can not hear any noise.
- The unique Class D digital powerless board with LC filter can be powered directly from the computer's USB.
- Double-panel wiring, properly solve the wiring caused by the potential balance and crosstalk between channels
2. Audio IC Development Tools Stereo 3.7W Class D Audio Amplifier (1 Piece)
9.5/10 our score
- Spread-Spectrum Modulation and Active Emissions Limiting
- Excellent click-and-pop suppression
- Thermal and short-circuit/over-current protection
- Passes EMI limit unfiltered with up to 12 inches (30 cm) of speaker cable
3. Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)
9.1/10 our score
- This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC.
- Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic "LM386" amps!
- The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin to ground. The output is "Bridge Tied" - that means the output pins connect directly to the speaker pins, no connection to ground.
- Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard and a 3.5mm screw-terminal blocks so you can easily attach/detach your speaker. You will be ready to rock in 15 minutes! Speaker is not included, use any 4 ohm or greater impedance speaker.
4. Rockville RXM-T2 Micro 2400w 2 Ch Marine/Boat Class D Amplifier 2x600W CEA Rated
8.8/10 our score
- Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier with conformal-coated PCB board. Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more.
- Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator.
- 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. Minimum THD at Rated Power: < 0.05%.
- Frequency Response: 15Hz - 20KHz. S / N Ratio: 100dB. S/N Ratio: >97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"
5. 2 Channel Amplifier Stereo Audio Amp Mini Hi-Fi Class D Integrated TPA3116 Amp for Home Speakers 50W x 2, with 19V 4.74A Power Supply - Fosi Audio V1.0B Black
8.6/10 our score
- Rock SolidAdvanced circuitry design, built-in speakers protection circuit, solid aluminum chassis.
- DrivableConnect to your MP3/Phone/PC/Echo Dot as input, 50W x2(4 ohms, 20 Hz - 20 kHz, 0.04% THD) can drive 2Ohm - 8Ohm speakers.
- High PerformanceHome Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound.
- Excellent ChipAdopt TI TPA3116D2 chip to get clear and clarity sound, no audible noise, dead silent when nothing is playing through it.
- What's Included?Come with V1.0 Amplifier, Power supply, AC power cord, Manual and 18-month warranty. You can contact us or return the item if you have any questions.
6. Fosi Audio BT20A Bluetooth 5.0 Stereo Audio 2 Channel Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0 CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116 (with Power Supply)
8.2/10 our score
- Small simple compact design but practical and powerful, little Hi-Fi Bluetooth wireless amplifier exclusively designed for the customers who pursue HiFi sound,
- Bluetooth 5.0 core, up to 50ft connection range guarantees low signal delay. No pop, no audible noise when Bluetooth connection is established,
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
- Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home,
- Home integrated digital amplifier, 18-month warranty, you can return the item if you have any problems,
7. NOYITO PAM8406 Stereo Class D Audio Amplifier Module Development Board 3W+3W Anti-electromagnetic Interference
8/10 our score
- This is a mini stero audio amplifier board equipped with PAM8406 amplifer IC supporting class AB/D dual mode output. It has strong Anti-electromagnetic interference function can be used in the anti-EMI circuits applications.
- Equipped with PAM8406 amplifer IC supporting class AB/D dual mode output.
- Strong Anti-electromagnetic interference function can be used in the anti-EMI circuits applications.
- Power: 3W+3W, Board Size: 32.38 X 26.42mm/1.27 X 1.04inch(L*W)
- Impedance: 2-4ohm
8. Fosi Audio BT30D Bluetooth 5.0 Stereo Audio Receiver Amplifier 2.1 Channel Mini Hi-Fi Class D Integrated Amp 50 Watt x2+100 Watt for Home Outdoor Passive Speakers/Subwoofer Powered Subwoofer
7.7/10 our score
- 2021 NEW MODEL: The updated version for BT30C. Join the audiophile music journey with Fosi Audio BT30D.
- 2.1CH Bluetooth 5.0 Power Amplifier. A new generation: exquisite design, improved operation, great sound performance.
- BT30D supporting Bluetooth and RCA input can drive most home passive speakers, passive/powered subwoofer. SUB volume/Frequency, Bass/Treble control ensure Hi-Fi music quality.
- Adopt 2 pcs Texas Instruments TPA3116D2 chip. High-performance effectively improve output power and audio quality. Max power output up to 200Watt.
- What You Get: BT30D Amp, 24V/4.5A power supply, user manual, our worry-free 18-month warranty, and friendly customer service.
9. ACEIRMC TPA3116D2 TPA3116 XH-M543 Dual Channel Stereo High Power Digital Audio Power Amplifier Board 120W+120W DIY Module
7.4/10 our score
- TPA3116D2 Dual Channel Class D Digital Power Audio Amplifier Board, DC12-26V High Power Stereo AMP Module for Car Vehicle Computer Speaker DIY Home Theater Audio System, XH-M543
- Onboard front-facing IC to improve the input sensitivity, high-definition sound quality.
- It can be used for for car vehicle computer speaker, family audio and video, and empty square.
- There is no solder joint on the back of the circuit board,the chip capacitors and the solder solder board together, so there is no possibility of short circuit.
- Package Includes: Audio amplifier board ,1 * Audio Cable
10. 30 Types 74HCxx Series Logic IC Assortment Kit, High-Speed Si-Gate CMOS IC.
7.2/10 our score
- 74HC Series High-speed Si-gate CMOS Logic ICs Assorted Kit.
- 30 Types, total 30 PCS (each 1 PCS), all DIP package.
- Packed in a plastic box.
- 100% New, Never Used. RoHS Compliant.