Below is the top 10 best lathe chuck for bowl turning review to guide you buy the best product. Choose one of these products and your satisfaction is guaranteed!
In Hurry? Checkout Our Top Pick Of Best Lathe Chuck For Bowl Turning.
Our Top Pick
9.7/10 our score
Best Lathe Chuck For Bowl Turning
Rank | Product Name | Score |
---|---|---|
1 |
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System |
9. 7 |
2 |
Simple Woodturning Tools - 1¼" X 8 TPI Vacuum Chuck for Woodturning Lathe Bowl Turning |
9. 5 |
3 |
PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System |
9. 1 |
4 |
Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible |
8. 8 |
5 |
WEN 34027 12-Inch by 16-Inch Variable Speed Multi-Directional Cast Iron Wood Lathe with 16-Inch Capacity Bowl-Turning Back Plate |
8. 6 |
6 |
BestEquip Lathe Chuck 4-inch Wood turning Chuck 4 Jaws 1inch x 8TPI Thread Lathe Chucks Set Self-centering Chuck Wood Lathe Bowl Chuck with Set of Quality Accessories New Case for Woodworking |
8. 2 |
7 |
WEN LA432F 8-Inch Flat Lathe Chuck Jaws for Bowl Turning |
8. 0 |
8 |
WEN LA421F 5-Inch Flat Lathe Chuck Jaws for Bowl Turning |
7 .7 |
9 |
Bundle - 2 items - NOVA Supernova 2 Chuck 23104 Bowl Turning Bundle (Includes 23055 Chuck, 6040 12" Bowl Jaws, 6030 Bumper Kit) with ILNS 1-1/4" x 8tpi Insert |
7. 4 |
10 |
Lathe Chuck,7-3/4", Flat Jaws, Installation Distance 0.79"/20mm, Lathe Woodturning Chucks, Flat Lathe Chuck Jaws for Bowl Turning |
7. 2 |
1. PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
9.7/10 our score
- Includes: Barracuda2 chuck body, (4) self-centering jaw sets, woodworm screw chuck, spindle adapter, gear key, Allen wrench, (8) screws, storage case
- Barracuda2 chuck body is 3. 5" Diameter and weighs 4 lbs. , pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter
- #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8", #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2", #3 wide bowl jaws: 3-1/16" To 4-3/8", pin jaws: 1" To 2-1/4"
- With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe, including bowls, spindles, pens, other small turning projects, and much more
- This is a C-Series Chuck, Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!
2. Simple Woodturning Tools - 1¼" X 8 TPI Vacuum Chuck for Woodturning Lathe Bowl Turning
9.5/10 our score
- American Made and Customer Supported by Harrison Specialties , a family owned CNC machining and manufacturing facility in the land of 10,000 lakes - Minnesota.
- This vacuum chuck gives you a great way to finish the bottom of your bowls and other turned vessels.
- Outside diameter: 3½"
- Steel tube length: 18" beyond the end of the chuck. Chuck material: 6061 aircraft aluminum
- Watch our Simple Vacuum Chuck Demo YouTube Video to see it work!
3. PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System
9.1/10 our score
- Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes
- Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor, Chuck body weighs 4 lbs and is 4" in diameter
- Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal, Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal
- Includes screw chuck, allen wrench, and a set of tightening levers
- This "C-Series" chuck is compatible with all "C-Series" jaws and accessories
4. Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible
8.8/10 our score
- SAFE AND SECURE: Anti-release spindle lock (reversible), Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications
- MINIMIZES LOAD: Small size (85-milimeter/3.35-inch) and weight minimizes load on small spindles and bearings
- FAST OPERATING ACTION: Ideal for production turning of smaller pieces, One-handed geared action, Powerful and positive grip
- ADVANCED FEATURES: Automatic jaw safety stop, copper impregnated jaw slides, and direct thread 1-inch x 8TPI dual thread
- SPECIFICATIONS: Up to 350-millimeter/14-inch diameter bowls (using 50-millimeter jaws), Up to 150-millimeter/6-inch length spigots (using 50-millimeter jaws), Takes the same accessory range as all other NOVA chucks
5. WEN 34027 12-Inch by 16-Inch Variable Speed Multi-Directional Cast Iron Wood Lathe with 16-Inch Capacity Bowl-Turning Back Plate
8.6/10 our score
- Adjust the variable speed anywhere from 500 to 2500 rotations per minute in either direction
- Attack workpieces up to 12 inches wide and 16 inches long
- Exterior back plate turns bowls up to 15.75 inches in diameter (see figure 3)
- Featuring a digital speed display, a 7-7/8 inch tool rest, a soft start 4.5-amp motor, a face plate, a center spur, a live center, and a two-year warranty
- Increase the capacity to 12 x 39 inches with the WEN 34027EX Table Extension (sold separately)
6. BestEquip Lathe Chuck 4-inch Wood turning Chuck 4 Jaws 1inch x 8TPI Thread Lathe Chucks Set Self-centering Chuck Wood Lathe Bowl Chuck with Set of Quality Accessories New Case for Woodworking
8.2/10 our score
- PREMIUM QUALITY- Chuck body made of quality steel. All guideways and bearing surfaces are precisely machined for better performance.
- HIGH PERFORMANCE JAWS- Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized.
- PRECISION HIGHLY POLISHING- With smooth surface, the lathe chuck is milled by pricing milling skill for high precision, accuracy and pretty appearance.
- A SET OF COMPLETE ACCESSORIES- This complete lathe chuck set include two jaws set and a set of installation tools, two deformation sleeve,which bring much convenience for your operation.
- WIDE APPLICATION- Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories.
7. WEN LA432F 8-Inch Flat Lathe Chuck Jaws for Bowl Turning
8/10 our score
- Modify your current WEN lathe chuck to keep bowls properly secured
- Hold round workpieces ranging from 2. 3 to 8. 3 inches in diameter
- Easily adjust the holding diameter with the 6-position peg system
- Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 48 mounting holes
- Compatible with the WEN LA4374 3. 75-Inch 4-Jaw Lathe Chuck
8. WEN LA421F 5-Inch Flat Lathe Chuck Jaws for Bowl Turning
7.7/10 our score
- Modify your current WEN lathe chuck to keep bowls properly secured
- Hold round workpieces ranging from 2. 6 to 5. 5 inches in diameter
- Easily adjust the holding diameter with the 4-position peg system
- Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 32 mounting holes
- Compatible with the WEN LA4275 2. 75-Inch 4-Jaw Lathe Chuck
9. Bundle - 2 items - NOVA Supernova 2 Chuck 23104 Bowl Turning Bundle (Includes 23055 Chuck, 6040 12" Bowl Jaws, 6030 Bumper Kit) with ILNS 1-1/4" x 8tpi Insert
7.4/10 our score
- Deluxe Nova Bowl Turning Kit WITH Adapter Insert to 1-1/4" x 8tpi
- Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility
- The multi-sided buffer has a unique reinforced steel insert giving solid mounting
- Quality materials used throughout for long life in tough woodworking conditions
- Sturdy Carrying Case to protect your investment
10. Lathe Chuck,7-3/4", Flat Jaws, Installation Distance 0.79"/20mm, Lathe Woodturning Chucks, Flat Lathe Chuck Jaws for Bowl Turning
7.2/10 our score
- INSTALLATION SIZE- The distance between of two install holes is 20mm/0.79", the slot to the second install hole lasts 11mm/0.43". The jaw set can fit not only 4 inch C typed chucks and 4 inch Nova chuck, but also other chucks with the same install size.
- WIDE APPLICATION- Light wight 0.77 kg (1.7 lb). The cole jaws made of Aluminium are designed for finishing and polishing woodturning bowl and plate bottoms.
- INSURANCE OFFERED- The jaw with insurance should be installed on chuck jaw number 4, insurance keeping jaws no falling from chucks. Our Bowl Reversing Jaws are made of high quality steel, well-shaped and durable, featuring long and stable performance.
- Large Capacity- Max. turning speed: 800 RPM. Large diameter range for workpieces from 2-1/2" to 7-3/4" can meets your different finishing and polishing working needs.
- 7-3/4" Jaw Diameter- The 7-3/4" jaw set consists of 4 flat jaws, and each has 7 holding positions. The distance between holes is about 1cm (0.4").