Here, we’ll review the top 10 best scroll saws on the market today. We’ll provide an overview of the pros and cons of each product. Read on for our selection of best scroll saws.
In Hurry? Checkout Our Top Pick Of Best Scroll Saws.
Our Top Pick
9.7/10 our score
Best Scroll Saws
Rank | Product Name | Score |
---|---|---|
1 |
Wen 3921 |
9. 7 |
2 |
DeWalt DW788 |
9. 5 |
3 |
Dremel Moto-Saw |
9. 1 |
4 |
Shop Fox W1713 |
8. 8 |
5 |
Delta Power 40-694 |
8. 6 |
6 |
Harbor Freight Tools Variable Speed |
8. 2 |
7 |
General International EX-16 |
8. 0 |
8 |
General International BT8007 |
7 .7 |
9 |
Jet 727200K |
7. 4 |
10 |
Rockwell ShopSeries RK7315 |
7. 2 |
1. Wen 3921
9.7/10 our score
- Make sure this fits by entering your model number.
- Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
- Variable speed goes from 400 to 1600 strokes per minute
- Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
- Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades
2. DeWalt DW788
9.5/10 our score
- Make sure this fits by entering your model number.
- Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
- Exclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
- On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
- Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
- Arm lifts so blade can be easily threaded through the material for inside cuts
3. Dremel Moto-Saw
9.1/10 our score
- Make sure this fits by entering your model number.
- Dust port adapter keeps line-of-sight clear and work space clean
- Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
- Detachable coping function for handheld use to take the tool to the work piece
- Variable-speed control for optimal cutting in a variety of materials
- Fast-clamp base attaches to various tables, benches and surfaces
- Blue edge guide locking levers illustrated on packaging are not included in the kit and do not affect performance of the tool
4. Shop Fox W1713
8.8/10 our score
- Make sure this fits by entering your model number.
- 1/8HP, 1.2-Amps, 110-Volt, 60Hz motor
- 16-Inch maximum cutting width
- Includes a gooseneck work light, dust blower and dust port
- Plain or pin blades
- No load speed: 550-1700 SPM
5. Delta Power 40-694
8.6/10 our score
- Make sure this fits by entering your model number.
- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
6. Harbor Freight Tools Variable Speed
8.2/10 our score
- Make sure this fits by entering your model number.
- Sold on Amazon
7. General International EX-16
8/10 our score
- Make sure this fits by entering your model number.
- Upper and lower blade guard assembly helps prevent accidental hand contact with the blade, switch protection device prevents unintentional start-up
- Unique head tilting 30° left and 45° right (not table tilting) keeps the workpiece level for better control and more accurate cuts — 2” max cutting depth
- Variable speed of 400-1400 strokes per minute — easy access speed and tension Controls with constant torque permanent magnet motor
- Onboard dust blower for direction dust extraction hook-up
- Large 12″ x 18.5″ table surface, quick blade changes with finger, operated blade Clamps, no tools required
8. General International BT8007
7.7/10 our score
- Make sure this fits by entering your model number.
- Up-front dial allows setting the exact cutting speed choice for processing different materials
- Flex-neck LED work light
- Saw dust collection port for standard 1-1/4-inch hose
- 144 watt, 120Volt 60hertz, amp: 1.2
- Max cutting capacity (throat depth): 16-inches, max cutting thickness: >, 2-inches at 90 degrees
9. Jet 727200K
7.4/10 our score
- Make sure this fits by entering your model number.
- Variable speed range of 400 – 1550 strokes per minute
10. Rockwell ShopSeries RK7315
7.2/10 our score